CNG Reducer X-8

CNG Reducer X-8/CNG conversion kit
Technical Parameters:
1. Max. Inlet Pressure: 220bar
2. Rated Working Pressure: 200bar
3. Rated Outlet Pressure: 2.0bar
4. Applicable Capacity: 1.0L~2.0L
5. Working Voltage: DC12V
6. Working Temperature: -40° C~120° C
7. Measurement: 180mm*98mm*98mm
8. Weight: 1.3kg
ISO9001: 2000 Quality system control production.

CNG Reducer
Work principle:
Electornically controlled device that reduces the methane pressure, permitting a regular flow of gas for all engine demands. It is equipped with three pressure reduction stages, providing stability at both high and low supply pressure, as the amount of gas supplied changes, and a low pressure solenoid valve upstream of the third stage. Heat absorbed from the pressure regulator ekments heated with the engine cooling circuit fluid ensures that the pressure regulator does not freeze during the pressure drop phase. The flow of gas needed for the engine to inle is activated by a dedicated solenoid valve, and supplied through the main flow gas pipe. Equipped with an electronic starting device incorporating a safety system that intervenes to close the gas solenoid valve when the engine is turned off, including accidentally.